Vita VA80206 Bolt System 2 Pack, Steel VA80205 Pergola Deck Brackets



Details)

The Bolt Down Bracket System enables pergola owners to mount their pergola safely and securely to a wood deck or cement patio. Simply measure your footprint and bolt the galvanized steel brackets into place. Insert 4 x 4 (10cm X 10cm) pressure treated wood posts (purchased separately) into the brackets and screw them in place. Slide your pergola posts over the wood posts, and screw the pergola posts into the wood. The result is a lasting installation that is safe and rigid. This mounting system was specifically designed for Vita brand pergolas. We highly recommend that if you are installing any of these vinyl pergolas on a flat surface, you purchase this kit. The mounting system comes with brackets and 1.5” (3.8cm) self-tapping screws. Important Note: DO NOT use the bolt down bracket system for installing the pergola over concrete pavers, patio stones, or interlocking bricks Extra Materials Required Depending on the type of installation, you will be required to purchase the following hardware: If mounting Pergola onto an existing concrete surface: • 1/4” x 2 3/4” Cement Screws – Countersunk head (12) • 3/16” Concrete drill bit. Minimum 3” long (1) • 4x4x ?* pressure treated wood posts if using for a pergola (4) *(length depends on the pergola selected) 1/2” x 3 1/2“x 12” long wood shims to “build out” posts (32) If mounting Pergola onto a wooden or composite deck with AN ACCESSIBLE UNDERSIDE: • 1/4” x ?” Bolts and nuts – Countersunk Head (12) • 1/4” Washers (12) (length depends on blocking material) • 1/4” Wood drill bit. Minimum 3” long (1) • 4x4x ?* pressure treated wood posts if using for a pergola (4) *(length depends on the pergola selected) • 1/2” x 3 1/2“x 12” long wood shims to “build out” posts (32)
Material: steel
Mount your pergola safely and securely to a wood deck or cement patio
Color: Steel
Do not mount on pavers or brick


Leave a Reply

Your email address will not be published.